|
Adtran TSU 120/120e T1/FT1 |
Product
Specifications for the
Adtran TSU120 and Adtran TSU120e T1/FT1
NETWORK INTERFACE
Line Rate: 1.544 Mbps +/- 75 bps
Physical Interface: RJ-48C, 8-pin modular
Framing: D4(SF)/ESF, AT&T 54016 or ANSI T1.403
Line Code: AMI/B8ZS
Input Signal: 0 to –36dB
DS0 Assignment: user selectable
T1 Transmit Timing: Network, Secondary NI, Normal (CSU), Internal, Base DSX-1 or Base DTE
V.35 DTE INTERFACE
Data Rate: Nx56 or Nx64 kbps (N=1 to 24)
Electrical and Mechanical: CCITT V.35, Winchester type, 34-pin
Clock Options: Normal/Inverted & Internal/External
Dial BackUp (TSU 120e only)
Accessible on base V.35 DTE Port
Requires optional V.35 "Y" cable
DBU Dialing: DTR dialing
DBU Test: Loopback to DCE, Test dialup network, Force dial backup
DSX-1 INTERFACE
Line Interface: DSX-1 per ANSI T1.102
Physical Interface: RJ-48C, modular 8-pin
DSX-1 Framing: D4(SF)/ESF
DSX-1 Line Code: AMI/B8ZS
DSX-1 Line Length: 0 to 655 ft in 133 ft steps
TESTING AND TROUBLESHOOTING
Local
Payload, Line, and DTE Loopback
Remote
Payload, Line, and DTE Loopback
Fractional T1 Loopback: Per ANSI T1.403-1995, Annex B
CSU Loopback (from Carrier Network)
Test Pattern Generator and Detector
QRSS and 511 (selectable DS0s)
All 0s and All 1s (transmit only)
Performance Monitoring
Error Counts: ES, SES, UAS, % AS, % EFSEC, Alarms and Error Rates
Reports: NI information stored for last 24 hours (15-minute increments)
PRMS: ANSI performance report messages
Network & DSX-1 Interface Test Jacks
Bantam Jacks: TX, RX and RXMON
MANAGEMENT OPTIONS AND
INTERFACES
Control In/Control Out Ports
Interface: EIA-232, PC serial port, modem or SLIP connection to router
Physical Connector: RJ-45, modular 8-pin
SNMP/Telnet
SLIP connection to router
MIB II, RFC1213, and 1407 compliant
ADTRAN Enterprise MIB for extended monitoring, 120e control/configuration and expansion module support
10BaseT Interface (120e only)
Interface: IEEE 802.3 Compliant, 10 Mbps
Physical connector: RJ-45, modular 8-pin
Service: SNMP, Telnet, ICMP, ARP, PING, T-Watch PRO™
PHYSICAL
Dimensions: 3.125" H, 12.5" D, 8.5" W
Weight: 4 lbs
Power: 115 VAC, 60 Hz, 9 W
Agency Approvals: UL 1950, CUL, FCC Part 15 (Class A), and FCC Part 68
ENVIRONMENT
Operating Temperature: 0° to 45°C, (32° to 122°F)
Storage Temperature: –20° to 70°C, (–4° to 158°F)
PRODUCT INCLUDES
One 6 ft. modular 8-pin to 8-pin cable,
modular-to-female
DB-25 adapter, modular-to-female DB-15 adapter,
two 15 ft modular T1 cables, and user manual
Ordering Information
EQUIPMENT PART #
TSU 120e.................................................1202129L1
TSU 120...................................................1202129L2
V.35 "Y" Cable........................................1200196L1
jump to
Product Info Page
jump to related Adtran page
ARC ELECTRONICS
301-924-7400 EXT 25
jump to ... Home Page
arc@arcelect.com