|2262 E1/T1 fiber optic modem|
The Canoga Perkins 2262 E1/T1 fiber optic modem is a reliable modem supporting standard speeds of 2.048Mbps (CEPT) and 1.544Mbps (DS1).
The Canoga Perkins 2262 is a reliable E1/T1 fiber optic modem supporting standard speeds of 2.048Mbps (CEPT) and 1.544Mbps (DS1).
The Canoga Perkins 2262 E1/T1 fiber optic modem provides a transparent fiber optic link extension for E1 or T1 signals. It accurately transmits and receives bipolar line codes such as AMI, B8ZS, and HDB3.
The Canoga Perkins 2262 T1 fiber modem is available as a standalone unit or as a rack mount card for installation in a Canoga Perkins Model 2201 Rack Assembly Chassis. A variety of electrical interface connectors are available to facilitate its connectivity with a multitude of E1/T1 products.
Switch selectable 75 Ohm unbalanced and 120 Ohm balanced interface impedances for E1 applications are supported. The T1 versions come standard for 100 Ohm balanced impedance operation.
The Canoga Perkins 2262 T1 fiber modem is available with 850nm multimode optics and 1310nm single mode optics. With a 1310nm laser on single mode cable, transmission distances to 25km or more are possible. ST or FC fiber interface connectors are available.
For applications that require many modems, the 2201 Rack Assembly Chassis holds up to ten 2200 series modems. Standard features of the chassis include audio, visual and dry contact alarms and power failure monitor. Redundant power is available as an optional feature.
In order to meet our customers’ exact requirements, Canoga Perkins provides modems and accessories in a multitude of configuration options.
jump to Part Numbers
|1.75"H x 8.4"W x 12.2"D|
|(44.4 x 213.6 x 309.9mm)|
|1.06"H x 7.8"W x 12.0"D|
|(26.9 x 198.1 x 304.8mm)|
|Standalone||3.6 lbs (1.63kg)|
|Rackmount Card||0.9 lb (0.40kg)|
|0° to 50°C|
|Up to 95% (Noncondensing)|
|(Std)||120VAC||10% @ 10W Max.|
|60Hz (Wall Mount)|
|(Opt)||120/240VAC 10% @ 10W Max.|
|50 to 60Hz, Male IEC Connector|
|(Opt)||-48VDC (38 to 72VDC) 0.2 Amps Max.|
|Composite Error Rate|
|LED (850nm, Multimode)|
|Laser Diode (1310nm, Single Mode)|
|ST or FC/PC|
|OUTPUT SIGNAL LEVEL|
|BNC & Terminal||Female DA-15 & Strip, RJ-48C, or|
|Terminal Strip &||RJ-48C|
|Available in DA-15 or Terminal Strip Depending on|
|(Guaranteed loss budgets. Typical loss budgets are 2dB greater.)|
|UL 60950/CSA C22.2 No. 60950|
|FCC Part 15 Class A|
jump to other Canoga Perkins products
see other Fiber equipment pages
see related fiber pages
jump to Fiber info - a Tutorial
jump to ...