Single Mode Ethernet to Fiber Converter - DC powered

Industrial Rated DC power Ethernet 10/100Base-TX  to Fiber Optics 100Base-FX
Single-Mode converter - 12VDC and 24VDC power


ANS-200FCS

  • Automatic MDI / MDI-X crossover for plug-and-play
  • Each port supports both 10/100 Mbps speed auto negotiation
  • Store-and-forward architecture
  • Full duplex IEEE 802.3x and half duplex backpressure flow control
  • 1.4Gbps high performance memory bandwidth.
  • Integrated look-up engine with dedicated 1 K unicast MAC addresses
  • Supports +10~+30Vdc voltage
    Reverse Polarity Protection
  • Supports operating temperatures from 0 ~ +70°C
  • DIN rail mount for industrial usage
  • Compatibility: IEEE 802.3, IEEE802.3u, IEEE802.3x
  • Interface: 10/100 Base-T and 100 Base-FX
  • Ethernet Port: 10/100 Mbps x 1
  • Fiber Optics Port: 100 Mbps x 1 (Single-mode)
  • Provides LEDs for network and power monitoring
  • ESD Protection:

ANS-200FCS


 
ANS-200FCS Single-Mode
Ethernet(10/100Base-TX) to Fiber Optics(100Base-FX) converter. Fiber Optics Transmission Distance: 15 km for full duplex. The Ethernet supports 10/100M auto-negotiation feature and auto MDI/MDIX function.
The ANS-200FCS operates at full duplex mode. In full duplex mode, range is 15km with 8.3/125, 8.7/125, 9/125 or 10/125 μm fiber cables. It contains "soft start" function with overload protection, high-low voltage protection. The width of the ANS-200FCS is just 32.30 mm, so it can be used where space is important.
Specifications
  • Automatic MDI / MDI-X crossover for plug-and-play
  • Each port supports both 10/100 Mbps speed auto negotiation
  • Store-and-forward architecture
  • Full duplex IEEE 802.3x and half duplex backpressure flow control
  • 1.4Gbps high performance memory bandwidth.
  • Integrated look-up engine with dedicated 1 K unicast MAC addresses
  • Supports +10~+30Vdc voltage
    Reverse Polarity Protection
  • Supports operating temperatures from 0 ~ +70°C
  • DIN rail mount for industrial usage
  • Compatibility: IEEE 802.3, IEEE802.3u, IEEE802.3x
  • Interface: 10/100 Base-T and 100 Base-FX
  • Ethernet Port: 10/100 Mbps x 1
  • Fiber Optics Port: 100 Mbps x 1 (Single-mode)
  • Provides LEDs for network and power monitoring
  • ESD Protection:
    • 8 KV Contact Discharge
    • 15KV Air-Gap Discharge
  • Fiber Optics Transmission distance:
    • Single mode fiber cables:
      • 8.3/125, 8.7/125, 9/125 or 10/125 μm
        15 km for full duplex.
  • Ethernet Cables:
    • 10 Base-T (Cat.3, 4,5 UTP cable; 100m Max.)
    • 00 Base-T (Cat.5 UTP cable; 100m Max.)
  • Environment:
    • Operating temperature: 0 °C ~ +70°C
    • Storage Temperature: -20 ~ +85°C
    • Relative Humidity: 10% to 90% non-condensing
  • Dimensions: 32.30 x 99.00 x 77.50 mm (W x H x D)
  • Power requirements: +10 to 30Vdc (Removable Terminal Block)
  • Power consumption: 0.12A@24Vdc (± 5%, arrowed)

AC power options

24V/1A power supply (DIN-Rail mounting)

ADN-KA52F
24V/1.7A power supply

DP-640
24V/0.1 AMP


PWR-24 / 110

 

see Other Industrial Rated Ethernet Switches

 

 


ARC ELECTRONICS
301-924-7400 EXT 25

jump to ... Home Page

arc@arcelect.com