Industrial Rated 10/100 Mbps
Ethernet Switch

  5-Port Industrial rated 10/100 Mbps Ethernet Switch - DC powered 10 to 30VDC - DIN rail mount - wide temp range - 40 to plus +75C

also view the Gigabit 5 port switch ANS205G

ANS-205 5-Port Industrial 10/100 Mbps Ethernet Switch
  • Automatic MDI / MDI-X crossover for plug-and-play
  • Each port supports both 10/100 Mbps speed auto negotiation
  • Store-and-forward architecture
  • Full duplex IEEE 802.3x and half duplex backpressure flow control
  • Supports +10 ~ +30V DC voltage
  • Low power consumption: 0.052A@24Vdc; +/- 5%,
  • Supports operating temperatures from –40 ~ +75C degrees
  • DIN rail mount for industrial usage
  • ESD Protection: 8KV Contact Discharge 15KV Air-Gap Discharge

ANS205A is 12 to 48VDC

see manual PDF

The ANS-205 has 5 Ethernet Switching ports that support 10/100Base-T, with a 10/100M auto-negotiation feature and auto MDI/MDIX function. It can connect 5 workstations and automatically switches the transmission speed (10 Mbps or 100 Mbps) for corresponding connections. The flow control mechanism is also negotiated. There is activity/link/data rate LEDs for each port to aid trouble-shooting. Port connectors are shielded RJ-45. A power source for 10-30VDC is required.
Features:
• Automatic MDI / MDI-X crossover for plug-and-play
• Each port supports both 10/100 Mbps speed auto negotiation
• Store-and-forward architecture
• Full duplex IEEE 802.3x and half duplex backpressure flow control
• Supports +10 ~ +30V DC voltage
• Supports operating temperatures from -40 ~ +75 degrees
• DIN rail mount for industrial usage
Specifications:
• Compatibility:IEEE 802.3, IEEE802.3u, IEEE802.3x
• Interface: 10/100 Base-T
•Port: 10/100 Mbps x 5 (Shielded RJ-45 Jack)
• Provides LEDs for network and power monitoring
•ESD Protection:
4KV Contact Discharge
8KV Air-Gap Discharge
• Cables:
10 Base-T (Cat.3, 4,5 UTP cable; 100m Max.)
100 Base-T (Cat.5 UTP cable; 100m Max.)
• Environment:
Operating temperature:  –40 ~ +75C degrees
Storage Temperature: –50 ~ +85C degrees
Relative Humidity: 10% to 90% non-condensing
• Dimensions: 32.6 mm or 1.5" x 98.2 mm or 3 7/8" x 77.2 mm or 3: (W x H x D)
•Power requirements: 10 to 30V DC (Removable Terminal Block)
•Low power consumption: 2.0W; Max

also view the Gigabit 5 port switch ANS205G

 

AC power options

24V/1A power supply (DIN-Rail mounting)

ADN-KA52F		 24V/1.7A power supply

DP-640		 24V/0.1 AMP


PWR-24 / 110

 

  Red Power is On
Power    
  Off Power is Off
  Yellow Link to 10 Mbps
10/100M    
  Green Link to 100 Mbps
(Port 1)    
  Off Not Networking
  Yellow Link to 10 Mbps
10/100M    
  Green Link to 100 Mbps
(Port 2)    
  Off Not Networking
  Yellow Link to 10 Mbps
10/100M    
  Green Link to 100 Mbps
(Port 3)    
  Off Not Networking
  Yellow Link to 10 Mbps
10/100M    
  Green Link to 100 Mbps
(Port 4)    
  Off Not Networking
  Yellow Link to 10 Mbps
10/100M    
  Green Link to 100 Mbps
(Port 5)    
  Off Not Networking
 

see manual PDF

 

see Other Industrial Rated Ethernet Switches

see PDF sheet on the ANS-205

ARC ELECTRONICS
301-924-7400 EXT 25

jump to ... Home Page

 arc@arcelect.com