HP Procurve 5304xl-32G
J8166A Gigabit Switch |
HP 5304xl-32G switch provides
flexible, cost-effective
Gigabit performance Scalable Layer 2, 3, and 4 compact modular chassis
HP 5304xl-32G 32 port gigabit switch provides flexible, cost-effective switch fabric speed of 38.4 Gigabit performance- Scalable Layer 2, 3, and 4 compact modular chassis
Sophisticated capabilities make this switch suitable for distribution as well as edge deployment where versatile levels of network intelligence are required
5304xl-32G J8166A |
32 10/100/1000 ports 2 x 10/100/1000 module J4907A 2 open module slots |
17.4 x 15.3 x 5.25 in. (44.2 x 38.9 x 13.34 cm) 3U height Standard 19 in. Telco rack |
Non-blocking architecture: 38.4 Gbps up to 76.8 Gbps (varies by model) non-blocking crossbar switching fabric provides wire-speed intra- and inter-module switching with up to 48 million pps throughput built on HP custom-designed ASIC technology
IP layer 3 routing: provides routing of IP at media speed; supports static routes, RIP, RIPv2, and OSPF
Router redundancy (XRRP): allows groups of 2 routers to dynamically back each other up to create highly available routed environments
IP multicast routing (PIM Dense): routes IP multicast using the PIM Dense routing protocol
IP multicast (data-driven IGMPv3): automatically prevents flooding of IP multicast traffic
HP switch meshing: dynamically load-balances across multiple active redundant links to increase available aggregate bandwidth
802.1s Multi-Instance Spanning Tree: high link availability in multiple VLAN environments by allowing multiple spanning trees
802.1w Rapid Convergence Spanning Tree Protocol: increases network uptime through faster recovery from failed links
802.3ad Link Aggregation Control Protocol (LACP) and HP trunking: support up to 36 trunks, each with up to 8 links (ports) per trunk; trunking across modules is supported
Cisco Fast EtherChannel® (FEC): supports Cisco's proprietary FEC trunking protocol
Web-based authentication: similar to 802.1X, provides a browser-based environment to authenticate clients that do not support the 802.1X supplicant
Access control lists (ACLs): provide IP layer 3 filtering based on source/destination IP address/subnet and source/destination TCP/UDP port number
VLAN support and tagging: support complete 8021Q (4,096 VLAN IDs) and 256 VLANs simultaneously
802.1v Protocol VLANs: isolate select non-IPv4 protocols automatically into their own VLANs
Group VLAN Registration Protocol (GVRP): allows automatic learning and dynamic assignment of VLANs
Port security: prevents unauthorized access using MAC address lockdown.
MAC address lockout: prevents configured particular MAC addresses from connecting to the network
Source port filtering: allows only specified ports to communicate with each other
TACACS+: eases switch management
security administration by using a password authentication server
5304xl-32G J8166A |
32 10/100/1000 ports 2 x 10/100/1000 module J4907A 2 open module slots |
17.4 x 15.3 x 5.25 in. (44.2 x 38.9 x 13.34 cm) 3U heightStandard 19 in. Telco rack |
Call us for Pre-sales and discount pricing
on HP J8166A Procurve 5304xl-32G
Managed Switch
@ 301-924-7400 EXT 25
- Purchase orders accepted on HP Networking equipment
- Contract Buying and Volume Discounts available !!
- Please contact us @ 301-924-7400 EXT 25 for Sales
ARC ELECTRONICS
jump to ...
Home
Page
arc@arcelect.com