RM16 - RM16M rack shelf chassis enclosure
 

RM16M 19 Model 1 19" by 7.25" tall MOD TEL 115VAC

RM16M 19 Model 2 19" by 7.25" tall MASS Term 115VAC

RM16M Model 3 19" by 7.25" tall Segmental 115VAC

RM16M Model 20 23"by 7.25" tall  Mass Term 48VDC

RM16M Model 21 19" by 7.25" tall Mass Termination 48VDC

RM16M Model 23 19" by 7.25" tall Segmental 48VDC

RM16M Model 24 19"by 7.25" tall MOD TEL 48VDC

RM16M Model 27 19" by 7.25" tall Dual MOD TEL 115VAC

RM16M Model 28 19" by 7.25" tall Dual Mass Termination 115VAC

RM16M Model 33 19" by 7.25" tall Dual MOD TEL 48VDC

RM16M Model 34 19" by 7.25" tall Dual Mass Termination 48VDC

Can be used on dial or lease line modems with restoral, DSU/CSU's or ISDN, the RM16M is the right choice. Power options include 115 VAC, -48 VDC, 230 VAC; RJ45 or Mass Termination in a rack mount solution, the RM16M shelf is THE product of choice.

Motorola can provide you with the correct solution to your Rack Mount requirements in a simple, easy to use rack system. Whether you need V.3600 modems, FT100 dual port T1 DSU, or a UTA 220 ISDN card, there is a rack to fit your requirements.

(Shown without a power supply)

The RM16M shelf is the ideal 16 slot enclosure for all your transmission product requirements. This enclosure features modular, redundant power supplies, multiple backplane configurations and the ability to mount it in either a 19" or a 23" (19" or 23' wide by 7.25" tall by 10" deep) cabinet using a reversible bracket. It supports the following Motorola  transmission products: V.3229, V.3400, V,3600 analog modems, UTA 220 ISDN TA, MR64 DSU/CSU, and FT100 T1-Fract. T1 DSU/CSU.

The Model 1 enclosure is a 115 VAC enclosure featuring a full backplane to support 16 PSTN V.32XX modems. Each slot is equipped with one RJ45 modular jack and one RS 232 DTE (DB25 F) interface.

Part # 62005201

The Model 2 enclosure. Same as above except the backplane has 2 PSTN 50 pin Mass Termination connectors with 4 port wire wrap in place of the RJ45 connections.

Part # 62005202

The Model 3 enclosure is our modular enclosure for maximum flexibility. This 115 VAC enclosure ships with blank segments instead of a backplane enabling "mix and match" of modems and DSU/CSU's in the same enclosure. DSU/CSU cards (MR64 and FT100) ship with a single slot backplane, modem back-planes are ordered separately.

Part # 62005203

Other shelves include 230 VAC and -48VDC versions of above, as well as lease line and dial back-up via dual modular or dual mass termination back-planes. The following page contains the currently available models as well as options and accessories.

UDS RM16M Model 1 Chassis/Rack fits all older "mini modem cards (stand alone or rack card)" modems (with out dial back-up)

DS RM16M Model 2 Chassis/Rack 50 pin Mass Term / Wire Wrap fits all older "mini modem cards (stand alone or rack card)" modems (with out dial back-up)

DS RM16M Model 27 and 28 Chassis/Rack 50 pin Mass Term / Wire Wrap - fits all older "mini modem cards (stand alone or rack card)" modems (with out dial back-up) - use this chassis for any modem or CSU that has a dial back-up feature

You  may also want to consider pre-owned gear!

jump to related rack mount modem/CSU pages

• jump to UDS Motorola Modem - CSU/DSU

• jump to Codex Motorola Modem - CSU/DSU

• jump to Multi-Drop Multi-Point modems

• jump to SCADA modems

• jump to VDC power modems

• jump to Industrial grade modems

• jump to Related modem pages   

• jump to SCADA CSU/DSU

ARC ELECTRONICS
301-924-7400 EXT 25

jump to ... Home Page

arc@arcelect.com