All industrial Modems and industrial Cellular models are capable of operation on 2-wire dial circuits, 2 or 4-wire leased circuits and 2 or 4-wire short haul copper. The following standard features are offered: Both RS-232 and RS-485 DTE interfaces - Stand alone industrial units are packaged in StarComm's rugged metal enclosure.

jump to StarComm info pages

Because all StarComm communications products are designed to withstand the rigors of industrial use, you can expect years of trouble-free operation. From traffic monitoring applications, in the heat of the Arizona desert to weather surveillance installations in Alaska, StarComm has developed a reputation for performance, quality and unique feature sets.

When defining your modem requirements, please consider the following benefits that StarComm offers to every customer:

Modern, Reliable Engineering
All designs incorporate the latest advancements in industrial components and materials.

• In-house environmental test facilities verify highest-quality design and production.
• Cost Effective, Quality Manufacturing
• Accurate, automated surface-mount production techniques to ANSI/IPC standards.
• 100% functional test of all units. 10% parametric test of all lots.
• Packaging Options
• Commercial stand-alone units are housed in StarComm's standard plastic enclosure.
• Industrial stand-alone units are housed in custom metal enclosures with a positive grounding system and integral wall mount tabs.
• Rack mount units are housed in a custom 16 slot metal chassis that conforms to Industry standard 19-inch rack specifications.

Temperature and Humidity Ratings

• Commercial: -20 through +70C 90% non-condensing
• Industrial: -40 through +85C 95% non-condensing
• Compliance
• All models meet or exceed FCC Part 68 requirements
• All models meet or exceed FCC Part 15 Class A
• Custom testing available upon request

Warranty

• 5 year parts and labor

LOW SPEED MODEMS
There are many applications where nothing will do the job as reliably or economically as a low speed modem. The StarComm family of low speed modems ranges from products as generic as our 2400bps smart modem to specialty items such as the 2400EQ quick connect modem for the transaction processing industry.

All low speed models offer an AT compatible command interface and support the following modulation standards: V.22bis, V.22, V.21, Bell 212A and Bell 103J. Please note that all Low Speed Modems with the exception of the 2400E-000-2, are rated for industrial use.

2400E-000-2 Stand alone, for 2-wire dial circuits. Power: 9vac or 9-14vdc

2400E-030-4 Stand alone, for 2-wire dial and 2 or 4-wire leased circuits. Power: 9vac or 9-14vdc

2400E-230-4 Stand alone, for 2-wire dial and 2 or 4-wire leased circuits. Power: 5.5-14vdc

2400E-330-4 Stand alone, for 2-wire dial and 2 or 4-wire leased circuits. Power: 19-75vdc

2400R-030-4 Rack mount, for 2-wire dial and 2 or 4-wire leased circuits. Requires CC-2016-XX rack.

2400E-034-2 Stand alone, Quick Connect for dial-up transaction processing. Power: 9vac or 9-14vdc

2400R-034-2 Rack mount, Quick Connect for dial-up transaction processing. Requires CC-2016-XX rack.

202T Industrial Modems
For years, the Bell 202 modem has delivered reliable low speed multi-point communications. Today, this device still enjoys great popularity due to its ability to communicate under adverse conditions. The Bell 202 remains the right choice for telemetry applications, control systems, transaction applications and for reliable data delivery over RF or cellular connections.

The StarComm 202T offers a modern implementation of this classic modulation standard. In this design, we have utilized the latest semiconductor technology to guarantee a level of performance and reliability that cannot be matched. The following modems offer Bell 202S (2-wire) and 202T (4-wire) compatibility. Custom options are also available for dial operation, onboard protocol support, and PTT RF applications.

202TE-037-4 Stand alone, for 2 or 4-wire leased circuits. Power: 9vac or 9-14vdc

202TE-237-4 Stand alone, for 2 or 4-wire leased circuits. Power: 5.5-14vdc

202TE-337-4 Stand alone, for 2 or 4-wire leased circuits. Power: 18-75vdc

202TR-037-4 Rack mount, for 2 or 4-wire leased circuits. Requires CC-2016-XX rack.

High-Speed Data/Fax Modems
Whether you are looking for commercial or industrial high speed modems, StarComm has a model to meet your requirements. Our High Speed modem designs are based around two of the most popular international standards for point-to-point full duplex modems. Whether you select our implementation of the V.34 standard, which defines operation at 33.6kbps or choose a model based on the V.32bis standard for 14.4kbps operation, you are guaranteed a high level of interoperability with modems from other vendors. You will also find that all of StarComm's high speed designs are totally capable of supporting the following older standards from 9600bps down to 300bps: V.32, V.22bis, V.22, V.23, V.21, Bell 212A and Bell 103J. Fax operation is supported under V.33, V.29 and V.27.

All models provide an AT compatible command interface and offer both synchronous and asynchronous DTE support as standard. On select models you will also find our unique remote configuration facility. When it comes to line interfaces, nobody delivers more flexibility: StarComm offers models for 2-wire dial circuits, 2 wire leased circuits and 4 wire leased circuits. As an added bonus, you will find that all models equipped with either our 2 or 4 wire leased line interface are also capable of driving 10 kilometers of unconditioned twisted pair, as a short haul modem. You will also find the same flexibility on the DTE interfaces of our High Speed Modems where certain models provide both RS-232 or RS-485.

Commercial V.32bis Models (14.4kbps)
All commercial models are capable of operation on 2-wire dial circuits, 2-wire leased circuits or short haul 2-wire copper. Stand alone commercial units are packaged in StarComm's standard plastic enclosure.

1442E-003-2 Stand alone, for 2-wire dial and 2-wire leased circuits. Power: 9vac or 9-14vdc

1442E-203-2 Stand alone, for 2-wire dial and 2-wire leased circuits. Power: 5.5-14vdc

1442E-303-2 Stand alone, for 2-wire dial and 2-wire leased circuits. Power: 18-75vdc

1442R-003-2 Rack mount, for 2-wire dial and 2-wire leased circuits. Requires CC-2016-XX rack.

Industrial V.32bis (14.4kbps) Models
All industrial models are capable of operation on 2-wire dial circuits, 2 or 4-wire leased circuits and 2 or 4-wire short haul copper. The following standard features are offered:

• Both RS-232 and RS-485 DTE interfaces.
• Remote configuration and management.
• Stand alone industrial units are packaged in StarComm's rugged metal enclosure.

1442E-016-4 Stand alone, for 2-wire dial and 2 or 4-wire leased circuits. Power: 9vac or 9-14vdc

1442E-216-4 Stand alone, for 2-wire dial and 2 or 4-wire leased circuits. Power: 5.5-14vdc

1442E-316-4 Stand alone, for 2-wire dial and 2 or 4-wire leased circuits. Power: 18-75vdc

1442R-016-4 Rack mount, for 2-wire dial and 2 or 4-wire leased circuits. Requires CC-2016-XX rack.

Commercial V.34 Models (33.6kbps)
All commercial models are capable of operation on 2-wire dial circuits, 2-wire leased circuits or short haul 2-wire copper. Stand alone commercial units are packaged in StarComm's standard plastic enclosure.

3342E-003-2 Stand alone, for 2-wire dial and 2-wire leased circuits. Power: 9vac or 9-14vdc

3342E-203-2 Stand alone, for 2-wire dial and 2-wire leased circuits. Power: 5.5-14vdc

3342E-303-2 Stand alone, for 2-wire dial and 2-wire leased circuits. Power: 18-75vdc

3342R-003-2 Rack mount, for 2-wire dial and 2-wire leased circuits. Requires CC-2016-XX rack..

Industrial V.34 (33.6kbps) Models
All industrial models are capable of operation on 2-wire dial circuits, 2 or 4-wire leased circuits and 2 or 4-wire short haul copper. The following standard features are offered:

• Both RS-232 and RS-485 DTE interfaces.
• Remote configuration and management.
• Stand alone industrial units are packaged in StarComm's rugged metal enclosure.

3342E-016-4 Stand alone, for 2-wire dial and 2 or 4-wire leased circuits. Power: 9vac or 9-14vdc

3342E-216-4 Stand alone, for 2-wire dial and 2 or 4-wire leased circuits. Power: 5.5-14vdc

3342E-316-4 Stand alone, for 2-wire dial and 2 or 4-wire leased circuits. Power: 18-75vdc

3342R-016-4 Rack mount, for 2-wire dial and 2 or 4-wire leased circuits. Requires CC-2016-XX rack.

Industrial Cellular Modems V.32 bis
In North America, Analog Cellular (AMPS) has evolved into a ubiquitous network of providers covering even the most remote of locations. Therefore, it is no surprise that many remote meter reading and data collection operations, are adopting AMPS as a standard method for reaching those locations where telephone lines do not exist. StarComm's industrial cellular modems are capable of reliable operation on any North American AMPS cellular network, at rates of 9600bps or lower. Radio options are available for operation at either a 600mw or 3 watts. . In addition to normal modem functions, StarComm Cellular modems offer special quick connect sequences that may be enabled for transaction oriented applications operating at rates of 2400bps or less. These quick connect sequences dramatically decrease connect time, thereby reducing transaction time and the associated phone charges. Decreased transaction time also greatly increased overall network performance and efficiency. When operating in quick connect mode, StarComm cellular modems are still compatible with modems from other manufacturers and all applicable international standards.

The following standard features are offered:

• Both RS-232 and RS-485 DTE interfaces.
• Remote configuration and remote management.
• Password protection and audit trail capabilities with precision time keeping.
• Units are packaged in StarComm's rugged metal enclosure.
• Quick connect transaction sequences are supported at rates of 2400bps or lower.

1442E-616-C Stand alone, 600mw cellular modem. Power: 9-18vdc

1442E-316-C Stand alone, 600mw cellular modem. Power: 18 - 75vdc

1442E-616-C3 Stand alone, 3 watt cellular modem. Power: 9-18vdc

1442E-316-C3 Stand alone, 3 watt cellular modem. Power: 18 - 75vdc

LOW POWER STANDBY MODEMS
V.34 (33.6kbps) and V.32bis (14.4kbps)
In solar or battery powered installations where power consumption is critical, StarComm Low Power Standby Modems offer a low current standby state that is activated when there is no active phone call and no DTE activity. Standby current is approximately 5ma. Relay contact closure is also provided so that power to other equipment may be controlled by the modem. All models offer an AT compatible command interface and support the following modulation standards: V.34(3342 only), V.32bis, V.32, V.22bis, V.22, V.23, V.21, Bell 212A and Bell 103J.

1442E-008-2 V.32bis stand alone, for 2-wire dial circuits. Power: 9vac or 9-14vdc

1442E-208-2 V.32bis stand alone, for 2-wire dial circuits. Power: 5.5-14vdc

1442E-308-2 V.32bis stand alone, for 2-wire dial circuits. Power: 18-75vdc

3342E-008-2 V.34 stand alone, for 2-wire dial circuits. Power: 9vac or 9-14vdc

3342E-208-2 V.34 stand alone, for 2-wire dial circuits. Power: 5.5-14vdc

3342E-308-2 V.34 stand alone, for 2-wire dial circuits. Power: 18-75vdc

SECURITY MODEMS
V.34 (33.6kbps)
As a leader in the field of remote access, StarComm is aware of the rapid increase in damage and down time due to unwanted network intruders. Fortunately, it is no longer necessary to accept the security risk associated with unprotected remote access installations.

Whether you are trying to protect configuration ports on remote equipment or control access to your private network, the StarComm family of security modems is the right solution. With the wide range of features and options available you can select from economical solutions for basic security requirements or powerful feature sets for complex security issues.

In applications where access control is critical, StarComm Security Modems provide password protection, caller ID protection and audit trail capabilities with precision time keeping. Standard features also include remote configuration and management of the device and its security features. Large networks may be managed with StarComm's optional Device Management Software. All models offer an AT compatible command interface and support the following modulation standards: V.34, V.32bis, V.32, V.22bis, V.22, V.23, V.21, Bell 212A and Bell 103J.

3342E-004-2 Stand alone, for 2-wire dial circuits. Power: 9vac or 9-14vdc

3342E-204-2 Stand alone, for 2-wire dial circuits. Power: 5.5-14vdc

3342E-304-2 Stand alone, for 2-wire dial circuits. Power: 18-75vdc

3342R-004-2 Rack mount, for 2-wire dial circuits. Requires CC-2016-XX rack.

MULTI-PORT SECURITY MODEMS
V.34 (33.6kbps)
Reduce phone line cost and increase security by replacing as many as eight incoming phone lines and eight standard modems with one StarComm Multi-Port Security Modem. In addition to all of the features of our single port security modems, each Multi-Port model offers multiple RS-232 ports for selective communications with numerous devices. Each model also provides relays for cycling power or resetting attached equipment. All models offer an AT compatible command interface and support the following modulation standards: V.34, V.32bis, V.32, V.22bis, V.22, V.23, V.21, Bell 212A and Bell 103J. Password protection, caller ID protection and audit trail capabilities with precision time keeping are standard features. In addition, all devices are capable of remote configuration, remote management and may be managed with StarComm's optional Device Management Software

Models providing 1 RS-232 port and 1 relay may be field upgraded to 2 ports and 2 relays.

Models providing 4 RS-232 ports and 1 relay may be field upgraded to 8 ports and 2 relays.

3342E-012-2 Stand alone, 1 RS-232 Port and 1 Relay. Power: 9vac or 9-14vdc

3342E-212-2 Stand alone, 1 RS-232 Port and 1 Relay. Power: 5.5-14vdc

3342E-312-2 Stand alone, 1 RS-232 Port and 1 Relay. Power: 18-75vdc

3342E-011-2 Stand alone, 2 RS-232 Ports and 2 Relays. Power: 9vac or 9-14vdc

3342E-211-2 Stand alone, 2 RS-232 Ports and 2 Relays. Power: 5.5-14vdc

3342E-311-2 Stand alone, 2 RS-232 Ports and 2 Relays. Power: 18-75vdc

3342E-010-2 Stand alone, 4 RS-232 Ports and 1 Relay. Power: 9vac or 9-14vdc

3342E-210-2 Stand alone, 4 RS-232 Ports and 1 Relay. Power: 5.5-14vdc

3342E-310-2 Stand alone, 4 RS-232 Ports and 1 Relay. Power: 18-75vdc

3342E-009-2 Stand alone, 8 RS-232 Ports and 2 Relays. Power: 9vac or 9-14vdc

3342E-209-2 Stand alone, 8 RS-232 Ports and 2 Relays. Power: 5.5-14vdc

3342E-309-2 Stand alone, 8 RS-232 Ports and 2 Relays. Power: 18-75vdc

CC-2016-XX 16 SLOT RACKS
The compact CC-2016-XX rack provides mounting and power for 16 modem cards. All power supply options are rated for industrial applications.

CC-2016-01 Configured for 115vac. Will also operate on 100-370vdc.

CC-2016-03 Configured for 230vac. Will also operate on 100-370vdc.

CC-2016-02 Configured for 36-75vdc.

CC-2016-07 Configured for 18-36vdc.

BRACKETS
78-1009-01 19 Inch Rack Mount Bracket For All Stand Alone Models - Accepts two 5" x 7" multi-port units or three standard 5" x 5" stand alone models.

78-1009-02 78-1017-001 9 Inch Wall Mount Bracket For All Stand Alone Models- Accepts either 5" x 7" multi-port units or standard 5" x 5" stand alone models.

CABLES
04-1007-001 3' Power Pig Tail With 12mm Barrel Connector - For all stand alone units.

04-1011-01 2' RJ-50 Male to DB-25 Female RS-232 - For multi-port RS-232 ports.

04-2001-002 3' Octopus Harness - 16-2 wire RJ-11 connectors to 50 pin female Telco connector.

04-2003-002 3' Octopus Harness - 16-2 wire RJ-11 connectors to 50 pin male Telco connector.

04-2002-002 3' Octopus Harness - 8-4 wire RJ-11 connectors to 50 pin female Telco connector.

04-2004-002 3' Octopus Harness - 8-4 wire RJ-11 connectors to 50 pin male Telco connector.

SOFTWARE
Device Management Software For management and configuration of all StarComm single and multi-port security modems. - Automates audit trail data collection and simplifies password management for large, distributed networks.

• jump to Multi-Drop Multi-Point modems

• jump to SCADA modems

• jump to VDC power modems

• jump to Industrial grade modems

• jump to Related modem pages   

ARC ELECTRONICS
301-924-7400 EXT 25 / 301-924-7400 EXT 25 / fax 301-924-7403

jump to ... Home Page

arc@arcelect.com