V23 Modem |
The DM-16 modem is a V.23, Frequency Shift Keyed (FSK) modem designed for voice frequency (VF) circuits and copper cable pairs for data rates of up to 1,200 Baud. This modem can operate over up to 36km of unloaded copper pairs or a 2/4 wire CCITT standard VF channel with frequency range of 300-3,400 Hz
see other V23 modem
The software configuration utility allows the user to:
|
The DM-16 modem is a V.23, Frequency Shift Keyed (FSK) modem designed for voice frequency (VF) circuits and copper cable pairs for data rates of up to 1,200 Baud. This modem can operate over up to 36km of unloaded copper pairs or a 2/4 wire CCITT standard VF channel with frequency range of 300-3,400 Hz
Operation
The V.23 modem is designed for use in a single EuroCard 19'' sub-rack system. This rack can accommodate 17 V.23 modems as well as 2 redundant power supplies for the system. The rear communications interface consists of one DB-9 female connector for serial connection to each modem module. The 2/4-wire interface is provided for on an RJ-11 4/4 connector.
Features |
2 and 4 Wire Operation |
DM-16 configured in V.23 mode |
Operates as point-to-point and multi- |
drop configuration (party line) |
19" Rack or mounted or stand-alone |
Configuration
Configuration is achieved by means of the DB-9 (female) serial interface on the front panel of the modem using the user-friendly Windows based software configuration utility. When a PC is plugged into this port, (and RTS is asserted) the modem will enter configuration mode automatically. Once the PC plug is removed, the modem will restart. This prevents the necessity to withdraw each modem from the rack for configuration.
This configuration utility runs under Windows 95™, Windows 98™, Windows NT™, Windows 2000™, Windows XP™.
The software configuration utility allows the user to:
The following parameters are available for configuration using the software utility:
Specifications
|
|
Number of Serial Ports |
1 Channel |
Type of Interface |
RS 232 CCITT V.28 |
Data Transfer Rate |
1200 Baud |
Flow Control |
RTS, CTS, DCD |
Type of Connection |
Standard 9 pin serial connection |
|
|
Number of channels |
1 or 2 Channels |
Isolation |
5 kV through matching transformer |
Termination |
600 Ohm, 10 kOhm ( high impedance) |
Transmitter output range |
- 4 to – 20 dBm |
Minimum output power |
-20 dBm |
Receiver Sensitivity |
Four ranges, 0 to -15dBm, -5 to -20dBm, -15 to -25 dBm, and -20 to -40dBm |
Test facilities |
4 x 2mm test jacks and line disconnect switches |
|
|
Input Range |
+12 Vdc and –12 Vdc |
Power Consumption |
50 mA @ +12 Vdc & 8 mA at –12Vdc |
|
|
Process Indications |
1 x Power On LED Indication |
|
4 x DCE Interface LED Indication for TXD, CTS, RXD, DCD |
|
|
Radiated Emission |
EN 55 022 Class A (formerly CISPR –022) |
|
|
Protection Class |
IP 00 (IP 20 in rack) |
Ambient temperature |
|
· Continuous Operation |
-10° to +60° C |
· Transportation and storage |
-40° to +70° C |
Relative Humidity |
95% |
|
|
Dimensions (W * H * D) |
5 hp x 3U (25.4 x 133.3 x 170 mm) |
Mass |
Approx. 160 grams |
Related 202T pages
ARC ELECTRONICS
301-924-7400 EXT 25
jump to ... Home Page
arc@arcelect.com