1442E-003-2 modem 1442-203-2 modem by Starcomm 2-4 wire leased line

STARCOMM Modem
AC DC power

Solutions for Utility and Industrial Automation SCADA applications including dial up and leased line modem

2-Wire, 4-Wire Leased Line, Synchronous or Asynchronous,
Autobaud or selectable formats and rates,
AC DC Power, Hot/Cold Temperature Rated

V.34, V.32bis, V.32, V.22bis, V.22, V.23, V.21, BELL 212A, BELL 103J.

these part numbers have been changed

1442E-003-2 modem Stand alone, for 2-wire dial and 2-wire leased circuits. Power: 9vac or 9-14vdc
1442E-203-2 modem Stand alone, for 2-wire dial and 2-wire leased circuits. Power: 5.5-14vdc

see new part numbers

INDUSTRIAL MODEMS

Dial and Leased Line Operation
AC DC powered

jump to Modem Manual PDF file


AT COMMAND SET V.42/MNP 2-4 ERROR CORRECTION MNP 10 EXTENDED SERVICES V.42bis/MNP5 DATA COMPRESSION GROUP 3 (CLASS I & 2) FAX RS-232-C (V.24) TERMINAL INTERFACE	ASYNC & SYNC DTE SUPPORT 2-WIRE LEASED LINE OPERATION 4-WIRE LEASED LINE OPERATION 2 OR 4-WIRE SHORT HAUL OPERATION AC OR DC POWERED NETWORK MANAGEMENT

A commitment to constant improvement keeps StarComm communications products ahead of the industry in quality and performance. Our 33.6Kbps and 14.4Kbps models incorporate the latest advancements in modem design to deliver more performance, more features and higher reliability.

StarComm 33.6Kbps models provide a complete implementation of the ITU-T V.34 standard for 33.6Kbps operation and our 14.4Kbps models comply with the, ITU-T V.32bis standard for 14.4Kbps operation. In addition, all models offer complete compatibility With older standards such as V.32 and V.22bis.

StarComm high-speed modems offer the features required for compatibility with a wide range of industry standard systems and software.

Starcomm modem chassis pic.GIF (24415 bytes)

All models are available in our standard stand-alone or rack mount configurations:

FEATURES AND SPECIFICATIONS

COMPATIBILITY - V.34, V.32bis, V.32, V.22bis, V.22, V.23, V.21, BELL 212A, BELL 103J.
LINE TYPE - Unconditioned lease line, 2 or 4 wire
DTE INTERFACE - RS-232C (V.24). Female DB25, Synchronous or Asynchronous: Autobaud or selectable formats and rates to 11 5.2Kbps on 3342 models or 57.6Kbps on 1442 models.
AUTO DIAL MODES - Standard Hays AT compatible dial commands or DTR dial of stored number.
ANSWER MODES - Standard auto answer or manual answer under DTE control.
ERROR CORRECTION - V.42 and MNP 2-4 error correction. MNP 10 extended cellular services.
DATA COMPRESSION - V.42bis and MNP5 data compression.
CONFIGURATION CONTROL - Standard AT commands.
DIAGNOSTICS - V.54 through AT commands.
LINE INTERFACE:
DIAL: 2-Wire Pulse or DTMF XMT level: 12dBm RCV sensitivity: -43dBm
2-WIRE LEASED XMT level: Adjustable RCV sensitivity: -43dBm
4-WIRE LEASED XMT level: Adjustable RCV sensitivity: -43dBm
* May also be used in 2 or 4-wire short haul applications.
POWER (STAND-ALONE UNITS) - 9 to 14VDC, 100 to 240 VAC
POWER (RACK MOUNT) - Standard CC-2016 rack automatically adjusts to 85-265VAC, 27-44OHz.
Optional DC supply automatically adjusts to positive or negative 36-75VDC.
ENVIRONMENTAL - Operating temperature range: -20C to +80C. Humidity: 90% non-condensing.
APPROVALS - FCC Part 68 & Part 15, Class A. Optional: International approvals available.
PHYSICAL (STAND ALONE UNITS) -Dimensions: 5.30"Lx5.05"Wx1.53"H. Weight: 12oz.
PHYSICAL (RACK MOUNT) - Fits CC-2016 rack. 4.73"Lx4.60"Wx.80"H. Weight: 9oz.
RACKS - The CC-2016-XX Series of 16 Slot Rack Mount Enclosures
These enclosures provide 16 modem slots in a standard 19 inch form factor which is 5 inches high and 6.5 inches in depth. The standard power system auto ranges from 85 to 265VAC with a frequency range of 27 - 440hz. An optional DC supply is also available for installations requiring operation on 36 - 75VDC. All rack configurations are designed for operation from -20C to +70C and offer a mean time between failure (MTBF) of 200,000 hours (22.8) years.
BRACKET - 19 Inch Rack Mount Bracket For All Stand Alone Models
This bracket provides mounting for three 5"x 5"stand alone rnodems or two 5" by 7" mufti-port modems within a standard 19 inch rack.
BRACKET - 9 Inch Wall Mount Bracket For All Stand Alone Models
This wall mount bracket may be attached to all 5" x 5" or 5" x 7" stand alone models.

new part numbers
the new units replace some of the old part number both 14.4Kbps and 33.6Kbps versions -
the new units have added Low Power, 4 wire lease line and higher AC and DC voltages

these part numbers now replace the below part #s

V.34 (33.6kbps) Data/Fax Modems – All models offer an AT compatible command interface and support the following modulation standards: V.34, V.32bis, V.32, V.22bis, V.22, V.23, V.21, Bell 212A and Bell 103J. The following modulation standards are supported for fax: V.33, V.29 and V.27. Both synchronous and asynchronous DTE are supported.

3342E-208-4
modem
Standalone 3342L Low Power, 2 wire dial and 2 or 4 wire leased circuits. Power:
9 to 14VDC, 100 to 240 VAC

3342R-003-4
modem
Rack mount, for 2-wire dial and 2 or 4-wire leased circuits.

V.32bis (14.4kbps) Data/Fax Modems – All models offer an AT compatible command interface and support the following modulation standards: V.32bis, V.32, V.22bis, V.22, V.23, V.21, Bell 212A and Bell 103J. The following modulation standards are supported for fax: V.33, V.29 and V.27. Both synchronous and asynchronous DTE are supported.

1442E-003-2 modem Stand alone, for 2-wire dial and 2-wire leased circuits. Power: 9vac or 9-14vdc

1442E-203-2 modem Stand alone, for 2-wire dial and 2-wire leased circuits. Power: 5.5-14vdc

Optional SC-HVC power supply for 24, 48. 125VDC 220/230VAC 50Hz

1442E-303-2 Stand alone, for 2-wire dial and 2-wire leased circuits. Power: 18-75vdc

1442R-003-2 Rack mount, for 2-wire dial and 2-wire leased circuits.

1442E-003-4 Stand alone, for 2-wire dial and 2 or 4-wire leased circuits. Power: 9vac or 9-14vdc

1442E-203-4 Stand alone, for 2-wire dial and 2 or 4-wire leased circuits. Power: 5.5-14vdc

Optional SC-HVC power supply for 24, 48. 125VDC 220/230VAC 50Hz

1442E-303-4 Stand alone, for 2-wire dial and 2 or 4-wire leased circuits. Power: 18-75vdc

1442R-003-4 Rack mount, for 2-wire dial and 2 or 4-wire leased circuits.

V.34 (33.6kbps) Data/Fax Modems – All models offer an AT compatible command interface and support the following modulation standards: V.34, V.32bis, V.32, V.22bis, V.22, V.23, V.21, Bell 212A and Bell 103J. The following modulation standards are supported for fax: V.33, V.29 and V.27. Both synchronous and asynchronous DTE are supported.

3342E-003-2 Stand alone, for 2-wire dial and 2-wire leased circuits. Power: 9vac or 9-14vdc
3342E-203-2 Stand alone, for 2-wire dial and 2-wire leased circuits. Power: 5.5-14vdc
3342E-303-2 Stand alone, for 2-wire dial and 2-wire leased circuits. Power: 18-75vdc
3342R-003-2 Rack mount, for 2-wire dial and 2-wire leased circuits.
3342R-006-2 Rack mount with network management, for 2-wire dial and 2-wire leased circuits.
3342E-003-4 Stand alone, for 2-wire dial and 2 or 4-wire leased circuits. Power: 9vac or 9-14vdc
3342E-203-4 Stand alone, for 2-wire dial and 2 or 4-wire leased circuits. Power: 5.5-14vdc
3342E-303-4 Stand alone, for 2-wire dial and 2 or 4-wire leased circuits. Power: 18-75vdc
3342R-003-4 Rack mount, for 2-wire dial and 2 or 4-wire leased circuits.

jump to OLD DC power connections diagram
(NOTE power plug polarity -
center pin is positive and the out side of 5.5 barrel connector is negative)

visit our other StarComm modem pages
jump to StarComm main page

jump to Modem Manual PDF file

ARC ELECTRONICS
jump to ... Home Page

arc@arcelect.com

Phone us at 301-924-7400 EXT 25

these part numbers now replace the below part #s	V.34 (33.6kbps) Data/Fax Modems – All models offer an AT compatible command interface and support the following modulation standards: V.34, V.32bis, V.32, V.22bis, V.22, V.23, V.21, Bell 212A and Bell 103J. The following modulation standards are supported for fax: V.33, V.29 and V.27. Both synchronous and asynchronous DTE are supported.
3342E-208-4 modem	Standalone 3342L Low Power, 2 wire dial and 2 or 4 wire leased circuits. Power: 9 to 14VDC, 100 to 240 VAC
3342R-003-4 modem	Rack mount, for 2-wire dial and 2 or 4-wire leased circuits.