GDC DDS All Rate DSU Specifications |
General DataComm CSU/DSU
Specifications
Compatibility: Fully compliant with Bell Pub. 62310 and ANSI T1.410 standards Data Rates
Synchronous: 2.4, 4.8, 9.6, 19.2, 56 and 64 Kbps
Asynchronous: 1.2, 1.8, 2.4, 4.8, 9.6, and 19.2 Kbps Operating Mode
Conventional DDS: Full duplex, point-to-point/multipoint
64 Kbps DDS: Full duplex, point-to-point
Data Encoding: Bipolar, return to zero
DTE Interface: ITU-T V.35 at 56 and 64 Kbps; EIA/TIA-232-E at 1.2 to 19.2 Kbps Data Format:
Synchronous: Binary, serial
Asynchronous: Binary, serial; 8, 9, 10 and 11-bit characters (ITU-T V.14 compliant) RTS/CTS Delay (nominal)
Normal
2.4 Kbps 8 milliseconds
4.8 Kbps 4 milliseconds
9.6 Kbps 2 milliseconds
19.2 Kbps 1 millisecond
56 Kbps 350 microseconds
64 Kbps N/A
Extended: 45 milliseconds
Line Requirements: 4-wire, non-loaded metallic circuits
Line Impedance: 135 ohms (nominal)
Transmitter Timing: Internal, External or Network Timing
Power Req: 105-129 VAC, 50/60 Hz, 8 W maximum Physical Characteristics
Width: 188 mm (7.4 in)
Height: 36 mm (1.4 in)
Depth: 279 mm (11.0 in)
Weight: 35 kg (1.0 lbs)
Shipping Weight: 1.0 kg (2.2 lbs)
Operating Temp: 0° to 50° C (32° to 122° F)
Humidity: Up to 95% without condensation
Safety Production: ETL Listed for U.S. and Canada
Warranty: 5 years
Ordering Info: - GDC DDS All Rate 048A061-A02
jump to DSU info page
Related pages
jump to GDC pages
jump to related CSU/DSU
jump to SCADA CSU/DSU
ARC ELECTRONICS
301-924-7400 EXT 25 / 301-924-7400 EXT 25 / fax 301-924-7403
jump to ... Home Page
arc@arcelect.com