Industrial grade DIN Rail Temp rated DC power Ethernet
10/100 Base-T to 100 Base-FT Fiber Optic Converter

Features Automatic MDI / MDI-X crossover for plug-and-play Ethernet supports both 10/100 Mbps speed auto negotiation Store-and-forward architecture Full duplex IEEE 802.3x and half duplex backpressure flow control Supports +10~+30VDC voltage or 115/220VAC Supports operating temperatures from 0°C ~ +70°C DIN rail mount for industrial usage

The ANS-200FT is a Ethernet(10/100Base-TX) to Fiber Optic(100Base-FX) converter. The Ethernet supports 10/100M auto-negotiation feature and auto MDI/MDIX function and is industrial rated, DIN Rail, Temp rated, DC power.

The ANS-200FT operates at either half or full duplex mode. In full duplex mode, range is 2km with 62.5/ 125µm fiber cables; in half duplex mode, range is 412m with 62.5/ 125µm fiber cables.

It contains "soft start" function with overload protection, high-low voltage protection.

The width of the ANS-200FT is just 32.30 mm, so it can be used where space is important.

Specifications

• Compatibility: IEEE 802.3, IEEE802.3u, IEEE802.3x
• Interface: 10/100 Base-T and 100 Base-FT
• Ethernet Port: 10/100 Mbps x 1
• Fiber Optic Port: 100 Mbps x 1
• Provides LEDs for network and power monitoring
• ESD Protection:
  • 4KV Contact Discharge
  • 4KV Air-Gap Discharge
• Fiber Optic Transmission distance:
  • Multi mode fiber:50/125, 62.5/125 or 100/140 µm
  • Multi mode fiber,412 m for half duplex, 2 km
• Ethernet Cables:
  • 10 Base-T (Cat.3, 4,5 UTP cable; 100m Max.)
  • 100 Base-T (Cat.5 UTP cable; 100m Max.)
• Environment:
  • Operating temperature: 0 °C~ +70°C
  • Storage Temperature: -20 ~ +85°C
  • Relative Humidity: 10% to 90% non-condensing
• Dimensions: 32.30 x 99.00 x 77.50 mm (W x H x D)
• Power requirements: 10 to 30Vdc (Removable Terminal Block)
• Power consumption: 0.12A@24Vdc (+/- 5%, arrowed)

24V/1A power supply (DIN-Rail mounting) ADN-KA52F

24V/1.7A power supply DP-640

24V/0.1 AMP PWR-24 / 110