| 
      StarComm  Industrail Modem | 
Low Power with sleep mode industrial grade modem, 2 wire dial and 2 or 4 wire leased circuits. Power: 12 VDC or 100 to 240 VAC
- (both 60 and 50 Hz), Synchronous or Asynchronous, Hot/Cold Temperature Rated.V.34, V.32bis, V.32, V.22bis, V.22, 
V.23, V.21, BELL 212A, BELL 103J.
 
* the new ST342LP replaces this modem *
| 
       | 
 AC DC powered jump to Modem Manual PDF file | 
| 
 | 
 | 
A commitment to constant improvement keeps StarComm communications products ahead of the industry in quality and performance. The models incorporate the latest advancements in modem design to deliver more performance, more features and higher reliability.
StarComm 3342E-208-4 Modem models provide a complete implementation of the ITU-T V.34 standard for 33.6Kbps operation and will operate V.34, V.32bis, V.32, V.22bis, V.22, V.23, V.21, BELL 212A, BELL 103J modulations.
All models are available in our standard stand-alone or rack mount configurations:
FEATURES AND SPECIFICATIONS
COMPATIBILITY - 
  V.34, V.32bis, V.32, V.22bis, V.22, V.23, V.21, BELL 212A, BELL 103J. 
LINE TYPE - 
  Unconditioned lease line, 2 or 4 wire
DTE INTERFACE - 
  RS-232C (V.24).  Female DB25, Synchronous or Asynchronous: Autobaud or 
  selectable formats and rates to 11 5.2Kbps on 3342 models or 57.6Kbps on 1442 
  models.
AUTO DIAL MODES - 
  Standard Hays AT compatible dial commands or DTR dial of stored number.
ANSWER MODES - 
  Standard auto answer or manual answer under DTE control. 
ERROR CORRECTION - 
  V.42 and MNP 2-4 error correction. MNP 10 extended cellular services. 
DATA COMPRESSION - 
  V.42bis and MNP5 data compression. 
CONFIGURATION CONTROL 
  - Standard AT commands. 
DIAGNOSTICS - V.54 
  through AT commands. 
LINE INTERFACE: 
  DIAL: 2-Wire Pulse or DTMF XMT level: 12dBm RCV sensitivity: -43dBm
  2-WIRE LEASED XMT level: Adjustable RCV sensitivity: -43dBm
  4-WIRE LEASED XMT level: Adjustable RCV sensitivity: -43dBm
  * May also be used in 2 or 4-wire short haul applications. 
POWER (STAND-ALONE 
  UNITS) - 9-14VDC 115, 220, 230 and 50hz VAC. 
POWER (RACK MOUNT) 
  - Standard CC-2016 rack automatically adjusts to 85-265VAC, 27-44OHz.  
  Optional DC supply automatically adjusts to positive or negative 36-75VDC. 
ENVIRONMENTAL - 
  Operating temperature range: -20C to +80C. Humidity: 90% non-condensing. 
APPROVALS - FCC 
  Part 68 & Part 15, Class A. Optional: International approvals available. 
PHYSICAL (STAND ALONE 
  UNITS) -Dimensions: 5.30"Lx5.05"Wx1.53"H. Weight: 12oz. 
PHYSICAL (RACK MOUNT) 
  - Fits CC-2016 rack. 4.73"Lx4.60"Wx.80"H. Weight: 9oz. 
RACKS - The 
  CC-2016-XX Series of 16 Slot Rack Mount Enclosures
  These enclosures provide 16 modem slots in a standard 19 inch form factor 
  which is 5 inches high and 6.5 inches in depth. The standard power system auto 
  ranges from 85 to 265VAC with a frequency range of  27 - 440hz. An optional DC 
  supply is also available for installations requiring operation on 36 - 75VDC. 
  All rack configurations are designed for operation from -20C to +70C and offer 
  a mean time between failure (MTBF) of 200,000 hours (22.8) years. 
BRACKET - 19 Inch 
  Rack Mount Bracket For All Stand Alone Models
This bracket provides 
  mounting for three 5"x 5"stand alone rnodems or two 5" by 7" mufti-port modems 
  within a standard 19 inch rack. 
BRACKET - 9 Inch 
  Wall Mount Bracket For All Stand Alone Models
This wall mount bracket 
  may be attached to all 5" x 5" or 5" x 7" stand alone models.
S24 - Sleep Inactivity Timer 
	Sets the length of time, in seconds, that the modem will operate in normal 
	mode with no detected telephone 
	line or DTE line activity before entering low-power sleep mode. The timer is 
	reset upon any DTE line or 
	telephone line activity. If the S24 value is zero, neither DTE line nor 
	telephone inactivity will cause the modem 
	to enter the sleep mode. 
	
	Range: 0-255 seconds Default: 0 
| 
    these part numbers now replace part # | V.34 (33.6kbps) Data/Fax Modems – All models offer an AT compatible command interface and support the following modulation standards: V.34, V.32bis, V.32, V.22bis, V.22, V.23, V.21, Bell 212A and Bell 103J. The following modulation standards are supported for fax: V.33, V.29 and V.27. Both synchronous and asynchronous DTE are supported. | 
| 3342E-208-4 modem | Standalone 3342L Low Power, 
	2 wire dial and 2 or 4 wire leased circuits. Power: 9-14VDC 
	115, 220, 230 and 50hz VAC.  | 
| 3342R-003-4 modem | Rack mount, for 2-wire dial and 2 or 4-wire leased circuits. | 
visit our other StarComm modem pages 
jump to
StarComm 
main page 
jump to Modem Manual PDF file
ARC ELECTRONICS
301-924-7400 EXT 25 
jump to ... 
Home 
Page
arc@arcelect.com