Universal MultiMode Fiber to SingleMode fiber Converter |
MultiMode
Fiber to SingleMode fiber Converter
Gigabit Ethernet GbE, OC3, OC12, OC48, STM1, STM4 and STM16
100Mbps to 2.5Gbps
|
|
The SFP SF1G series are designed for
Gigabit Ethernet data links and are deployed in FibroLAN's MCM1000X
MetroStar module, in GSM1000X remote
Access device, and in GTAxx00 series devices.
The SF2X series are designed to operate
from 100Mbps to 2.5Gbps and are deployed in FibroLAN's MSM2500U
MetroStar module and in U.CON2500 Converter/Extender device.
These FibroLAN devices are protocol
independent for the specified transmission speed and efficiently support
Fast Ethernet, Fiber Channel, Gigabit Ethernet, OC3, OC12, OC48, STM1,
STM4, and STM16. The SF2G/C family transceivers are designed for CWDM data links and may be installed also in MSM2500U and U.CON2500 devices.
Small Form-factor Pluggable optical
interfaces are suitable for ease of deployment, maintenance and
logistics, and do not require any settings or measurements.
The main advantages of the
hot-swappable SFP optical interfaces are the density, flexibility, and
cost savings. SFP modules can be easily interchanged, thus fiber optic
networks can be upgraded more conveniently than with traditional
modules. The SFP transceivers provide status information (SFP modules status and SFP port status). The key features are common to all SFP series. |
Key Features | CWDM SFP |
|
|
see the MetroStar MSM2500U Card that hold these modules
General Specifications
Standard Compliance: Fast Ethernet (100Base-FX), Gigabit Ethernet, Fiber Channel , OC3, OC12, OC48, STM-1, STM-4, STM-16 |
Management: SNMP managed via MetroStar(MSM2500U) MA™ management (MCM1000X,GSM1000x) |
Conversion Method: Universal protocol transparent device CWDM |
Diagnostic LED (FibroLAN devices that support SFP) TX-LOW LED for Port 1 and Port 2: OFF = Transmission is OK LIT Red = Transmission signal low (does not reach the required distance ) Blinking = Invalid Authentication: implies that not a FibroLAN SFP is used (no TX) |
F/O Ports: Simplex and Duplex LC connectors Each F/O port may be disconnected via management |
|
Operating Temperature: 0° ÷ +70°C |
Storage Temperature -40° ÷ +85°C |
Management
The SFP
transceivers have status screens, which can be displayed via the menu of
FibroLAN devices that
support SFP (MCM1000X, GSM1000X and MSM2500U)
Port# Part# Type Range Tx-WL Rx-WL S/N =========================================================================== 1 SF1G-SF15 SM-SFS 20000m 1550nm 1310nm FibroLAN-SER#1 2 SF2G-LX4-5C-61 SM 80000m 1611nm 1611nm FibroLAN-SER#100 |
The SFP port status contains the same info and a Tx Power indicator(Normal, Low, N/A=SFP unplugged)
Ordering Information
Part # |
Model |
Description |
B289 |
SFP (Small Form Pluggable) OC3 Single Fiber Strand F/O transceiver, LC connector, SM 1550nmTx/1310nmRx, 15 km |
|
B290 |
SF155-SMRF13 |
SFP (Small Form Pluggable) OC3 Single Fiber Strand F/O transceiver, LC connector, SM 1310nmTx/1550nmRx, 15 km |
B248 |
SF1G-T |
SFP module, GBE F/O transceiver,1000Base-T, shielded RJ45, 100m over Cat.6 cable |
B235 |
SF1G-S1 |
SFP module, GBE F/O transceiver, dual LC connector, MM 850nm, 220/550m |
B236 |
SF1G-LX1 |
SFP module, GBE F/O transceiver, dual LC connector, SM1310nm, 10km |
B237 |
SF1G-LX2 |
SFP module, GBE F/O transceiver, dual LC connector, SM 1310nm, 20km |
B238 |
SF1G-LX3 |
SFP module, GBE F/O transceiver, dual LC connector, SM 1550nm/DFB , 40km |
B239 |
SF1G-LX4 |
SFP module, GBE F/O transceiver, dual LC connector, SM 1550nm/DFB , 80km |
B240 |
SF1G-LX5 |
SFP module, GBE F/O transceiver, dual LC connector, SM1550nm/DFB/ APD, 120km |
B241 |
SF1G-SF13 |
SFP module, Single Fiber Strand, GBE F/O transceiver, 1* LC, SM 1310nm Tx/1550nmRx, 20km |
B242 |
SF1G-SF15 |
SFP module, SFS, GBE, F/O transceiver, 1*LC, SM 1550nmDFB Tx/1310nm Rx, 20km |
B243 |
SF1G-LF13 |
SFP module, Single Fiber Strand GBE F/O transceiver, 1* LC, SM 1310nmDFB Tx/1550nmRx, 40km |
B244 |
SF1G-LF15 |
SFP module, SFS, GBE F/O transceiver, 1*LC, SM 1550nmDFB Tx/1310nm Rx, 40km |
B269 |
SF1G-ZF49 |
SFP, SFS, GBE F/O transceiver, LC connector, SM, 1490nm DFB Tx/ 1550nmRx, 80km |
B270 |
SF1G-ZF57 |
SFP, SFS, GBE F/O transceiver, LC connector, SM 1550nm DFB Tx/1490nmRx, 80km |
B281 |
SF1G-LX5-5C-47 |
CWDM SFP, 1.25Gbps F/O transceiver, dual LC connector, SM 1471nm DFB/APD, 120km |
B282 |
SF1G-LX5-5C-49 |
CWDM SFP, 1.25Gbps F/O transceiver, dual LC connector, SM 1491nm DFB/APD,120km |
B283 |
SF1G-LX5-5C-51 |
CWDM SFP, 1.25Gbps F/O transceiver, dual LC connector, SM 1511nm DFB/APD,120 km |
B284 |
SF1G-LX5-5C-53 |
CWDM SFP, 1.25Gbps F/O transceiver, dual LC connector, SM 1531nm DFB/APD,120 km |
B285 |
SF1G-LX5-5C-55 |
CWDM SFP , 1.25Gbps F/O transceiver, dual LC connector, SM 1551nm DFB/APD,120km |
B286 |
SF1G-LX5-5C-57 |
CWDM SFP , 1.25Gbps F/O transceiver, dual LC connector, SM 1571nm DFB/APD,120km |
B287 |
SF1G-LX5-5C-59 |
CWDM SFP , 1.25Gbps F/O transceiver, dual LC connector, SM 1591nm DFB/APD,120 km |
B288 |
SF1G-LX5-5C-61 |
CWDM SFP , 1.25Gbps F/O transceiver, dual LC connector, SM 1611nm DFB/APD,120km |
B268 |
SF2G-S1 |
SFP module, 2.5Gbps F/O transceiver, dual LC connector, MM 850nm, 300/400m |
B249 |
SF2G-S2 |
SFP module, 2.5Gbps F/O transceiver, dual LC connector, SM 1310nm, 2 km |
B250 |
SF2G-LX2-3 |
SFP module, 2.5Gbps F/O transceiver, dual LC connector, SM,1310nm DFB, 15 km |
B251 |
SF2G-LX2-5 |
SFP module, 2.5Gbps F/O transceiver, dual LC connector, SM, 1550nm DFB, 15 km |
B252 |
SF2G-LX3-3 |
SFP module, 2.5Gbps F/O transceiver, dual LC connector, SM,1310nm DFB/APD, 40 km |
B253 |
SF2G-LX3-5 |
SFP module, 2.5Gbps F/O transceiver, dual LC connector, SM 1550nm DFB, 40 km |
B254 |
SF2G-LX4-5 |
SFP module, 2.5Gbps F/O transceiver, dual LC connector, SM1550nm DFB/APD, 80 km |
B271 |
SF2G-LX3-5C-47 |
CWDM, SFP 2.5Gbps F/O transceiver, dual LC connector, SM 1471nm DFB, 40 km |
B272 |
SF2G-LX3-5C-49 |
CWDM, SFP 2.5Gbps F/O transceiver, dual LC connector, SM 1491nm DFB, 40 km |
B273 |
SF2G-LX3-5C-51 |
CWDM, SFP 2.5Gbps F/O transceiver, dual LC connector, SM 1511nm DFB, 40 km |
B274 |
SF2G-LX3-5C-53 |
CWDM, SFP 2.5Gbps F/O transceiver, dual LC connector, SM 1531nm DFB, 40 km |
B275 |
SF2G-LX3-5C-55 |
CWDM, SFP 2.5Gbps F/O transceiver, dual LC connector, SM 1551nm DFB, 40 km |
B276 |
SF2G-LX3-5C-57 |
CWDM, SFP 2.5Gbps F/O transceiver, dual LC connector, SM 1571nm DFB, 40 km |
B277 |
SF2G-LX3-5C-59 |
CWDM, SFP 2.5Gbps F/O transceiver, dual LC connector, SM 1591nm DFB, 40 km |
B278 |
SF2G-LX3-5C-61 |
CWDM, SFP 2.5Gbps F/O transceiver, dual LC connector, SM 1611nm DFB, 40 km |
B258 |
SF2G-LX4-5C-47 |
CWDM, SFP 2.5Gbps F/O transceiver, dual LC connector, SM 1471nm DFB/APD, 80 km |
B259 |
SF2G-LX4-5C-49 |
CWDM, SFP 2.5Gbps F/O transceiver, dual LC connector, SM 1491nm DFB/APD, 80 km |
B260 |
SF2G-LX4-5C-51 |
CWDM, SFP 2.5Gbps F/O transceiver, dual LC connector, SM 1511nm DFB/APD, 80 km |
B261 |
SF2G-LX4-5C-53 |
CWDM, SFP 2.5Gbps F/O transceiver, dual LC connector, SM 1531nm DFB/APD, 80 km |
B262 |
SF2G-LX4-5C-55 |
CWDM, SFP 2.5Gbps F/O transceiver, dual LC connector, SM 1551nm DFB/APD, 80 km |
B263 |
SF2G-LX4-5C-57 |
CWDM, SFP 2.5Gbps F/O transceiver, dual LC connector, SM 1571nm DFB/APD, 80 km |
B264 |
SF2G-LX4-5C-59 |
CWDM, SFP 2.5Gbps F/O transceiver, dual LC connector, SM 1591nm DFB/APD, 80 km |
B265 |
SF2G-LX4-5C-61 |
CWDM, SFP 2.5Gbps F/O transceiver, dual LC connector, SM 1611nm DFB/APD, 80 km |
Specifications are subject to change w/out any prior notice
The SFP transceivers from SF1G-T (B248) through SF1G-LX5-SC-61(B288) are deployed in the following FibroLAN equipment: MetroStar module MCM1000X, CPE device GSM1000X and GTAxx00 series
The SFP transceivers from SF155-SMRF15 (except SF1G-T) through) SF2G-LX4-5C-61 are used in the following FibroLAN equipment: MetroStar module MSM2500U and U.CON2500 devices
All recommended distances for CWDM active components assume direct point-to-point connection between them. If these are passing thru passive Mux/Demuxes, the additional attenuation introduced by such devices must be considered when assessing the actual distance
see the MetroStar MSM2500U Card that hold these modules
for more specs on the
MetroStar Rack
for more specs on the
UCON-2500 series
Universal Multi-Mode to Single-Mode Media Converter can be
used at remote end of the fiber run.
see other Fibrolan Media Converters
ARC ELECTRONICS
301-924-7400 EXT 25
jump to ... Home Page
arc@arcelect.com